INFY INFY
EXP600K4-LWR5

600kW Liquid Cooled Power Cube/10 Charging Connectors, Overhead Charging Dispenser Solution

600k4.png
INFY

Product Introduction

EXP600K4-LWR5 split type high power charger is specifically designed for EV charging operators with flexible split and multi charging point solutions. It supports CCS/CHAdeMO/GBT charging connectors, delivering up to 600kW of output power, and accommodates up to 10 charging connectors via 5 dual-connector dispensers or 10 single-connector dispensers. An optional 500A liquid-cooled charging connector is available, and each connector can receive maximum power through intelligent power switching. An intelligent power switching matrix dynamically allocates power modules among charging connectors, maximizing overall power utilization efficiency. The fully liquid-cooled power module design provides exceptional protection and high reliability. The overhead dispenser solution for bus depots is also available, utilizing the same power cube.

Technical Specification

  • EXP600K4-LWR5
  • AC input
    INFY
      AC input frequency/voltage45-65Hz/

      CE: 3-phase+(N)+PE, 380Vac/400Vac±10%; UL: 3-phase+(N)+PE, 480Vac±10%

      AC max input current2*480A@380Vac
      Power factor>0.99
      Total harmonic current<5% (rated input )
  • DC output
    INFY
      Output DC voltage range150V-1000V
      Max DC output power600kW@300V~1000V
      DC output current

      500A (optional 300A) for each output charging channel

      Max system efficiency>96% (rated input and output)
      Output channelMax 10 charging channels as the input of the charging dispensers
      Dispenser supportMax 5 dual-connectors dispensers or 10 single-connector dispensers
  • HMI
    INFY
      RGB LED, E-STOP
  • Mechanical
    INFY
      Dimensions: W * H * D mm = 2050 * 2200 * 850 mm Weight: 1200kg + 20 * 30kg = 1800 kg (full power modules and full liquid)
  • Protection class
    INFY
      IP65 (excluding heat exchange chamber)
  • Noise
    INFY
      <55dB (@25°C, rated input and output ), max noise <60dB
  • Power switch
    INFY
      Intelligent power switch among the power module groups, can switch to each output channel to maximize the power efficiency
  • Power module
    INFY
      Max 20 module slotsLRG1K0100G 30kW/1000V liquid cooled power module
  • Charging Dispenser-Stand Floor Dispenser (EXP250 FDC)
    INFY
      DC inputDC input voltage range:150V~1000V
      DC input channel:2 channel DC bus
      DC outputOutput charging cable:2
      Output DC voltage range:150V~1000V
      Max DC output current:2 * 250A 
      HMITempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt)
      Metering

      DC energy meter, GB/T 29318 and JJG1149 standard, optional MID-certified meter

      Monitor

      OCPP 1.6J, support update to 2.0, PnC/smart charging/power management support, LAN 100M and LTE wireless modem support

      Cable management

      Top-mounted two cable retractors and a light bar for floor-standing dispenser. Select one or two cable retractors based on cable length for overhead dispenser

      MBE function supportWEB side Maintenance Backend System enhances the operation and maintenance effectiveness
      Charging protectionOvercurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature  protection
      Reverse polarity protection
      MechanicalDimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10
      Charging connector configuration

      2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS

      Charging connector capacity

      CCS: 200A/250A/300A/375A/500A; NACS: 200A/300A/380A; CHAdeMO: 125A/200A; GBT:250A/400A/500A

      Noise0
  • Charging Dispenser-Stand Floor Dispenser (EXP400-FDC)
    INFY
      DC inputDC input voltage range:150V~1000V
      DC input channel:2 channel DC bus
      DC outputOutput charging cable:2
      Output DC voltage range:150V~1000V
      Max DC output current:2 * 375A 
      HMITempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt)
      Metering

      DC energy meter, GB/T 29318 and JJG1149 standard, optional MID-certified meter

      Monitor

      OCPP 1.6J, support update to 2.0, PnC/smart charging/power management support, LAN 100M and LTE wireless modem support

      Cable management

      Top-mounted two cable retractors and a light bar for floor-standing dispenser. Select one or two cable retractors based on cable length for overhead dispenser

      MBE function supportWEB side Maintenance Backend System enhances the operation and maintenance effectiveness
      Charging protectionOvercurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature  protection
      Reverse polarity protection
      MechanicalDimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10
      Charging connector configuration

      2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS

      Charging connector capacity

      CCS: 200A/250A/300A/375A/500A; NACS: 200A/300A/380A; CHAdeMO: 125A/200A; GBT:250A/400A/500A

      Noise0


  • Charging Dispenser-Stand Floor Dispenser (EXP500-LDC/LLDC)
    INFY
      DC inputDC input voltage range:150V~1000V
      DC input channel:2 channel DC bus
      DC outputOutput charging cable:2
      Output DC voltage range:150V~1000V
      Max DC output current:500A* 250A / 2*500A 
      HMITempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt)
      Metering

      DC energy meter, GB/T 29318 and JJG1149 standard, optional MID-certified meter

      Monitor

      OCPP 1.6J, support update to 2.0, PnC/smart charging/power management support, LAN 100M and LTE wireless modem support

      Cable management

      Top-mounted two cable retractors and a light bar for floor-standing dispenser. Select one or two cable retractors based on cable length for overhead dispenser

      MBE function supportWEB side Maintenance Backend System enhances the operation and maintenance effectiveness
      Charging protectionOvercurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature  protection
      Reverse polarity protection
      MechanicalDimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10
      Charging connector configuration

      2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS

      Charging connector capacity

      CCS: 200A/250A/300A/375A/500A; NACS: 200A/300A/380A; CHAdeMO: 125A/200A; GBT:250A/400A/500A

      Noise55dB


  • Charging Dispenser-Overhead Dispenser (EXP250/400-FSW)
    INFY
      DC inputDC input voltage range:150V~1000V
      DC input channel:1 channel DC bus
      DC outputOutput charging cable:1
      Output DC voltage range:150V~1000V
      Max DC output current: 250A /375A
      HMITempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt)
      Metering

      DC energy meter, GB/T 29318 and JJG1149 standard, optional MID-certified meter

      Monitor

      OCPP 1.6J, support update to 2.0, PnC/smart charging/power management support, LAN 100M and LTE wireless modem support

      Cable management

      Top-mounted two cable retractors and a light bar for floor-standing dispenser. Select one or two cable retractors based on cable length for overhead dispenser

      MBE function supportWEB side Maintenance Backend System enhances the operation and maintenance effectiveness
      Charging protectionOvercurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature  protection
      Reverse polarity protection
      MechanicalDimensions: W*H*D mm:763*415*240/50kg/IP65
      Charging connector configuration

      CCS/GBT/NACS

      Charging connector capacity

      CCS: 200A/250A/300A/375A/500A; NACS: 200A/300A/380A; CHAdeMO: 125A/200A; GBT:250A/400A/500A

      Noise0


  • Standard
    INFY
      Charging standardGBT 27930-2011/27930-2015, CHAdeMO V1.2/V2.0, DIN70121, ISO15118, OCA
      EMC/safety

      EN 61851-21-2, EN 61000-6-4, EN 61000-6-2 Class A, EN 61851-1, EN 61851-23, EN 61851-24, UL 2202

  • Working Environment
    INFY
      Ambient temperatureWorking temperature range -30~+70°C, full load temperature range -25~+50°C, power derating 5%/°C above 50°C
      Storage temperature-40~+75°C
      Working humidity0 ~ 95%
      Working altitude2000 m