
Product Introduction
The ICS500K battery energy storage system is specially designed for the commercial and industrial energy storage and EV charging energy storage applications. It offers max 500kW power capacity and supports max 4 sets of 215kWh IBS215K1KC battery cube access to achieve max 860kWh battery energy capacity. Max 4 sets can work in parallel to reach 2MW/3.44MWh capacity.
-
Leading modular solar storage all in one design to meet different scenarios, such as small land size, solar integration, etc.
-
Modular cabinet design to match CPO phased operational requirements
-
Optional STS support to realize the backup load instant power support during off grid in 20ms
-
Max 3 sets in parallel to support 1.5MW/2.5MWH application
-
Countercurrent protection with gateway AC Meter and EMS cooperate to meet operation demands
-
Flexible configuration with solar power to increase renewable accessibility
-
Outdoor IP54 to facilitate deployment in different application scenarios
Application
-
ICS500K1KFD
-
ICS500K1KFD
-
Local Energy Managment System
Technical Specification
-
ICS500K1KFD 500kW Power Cube
-
IBS215K1KC 215kWh Battery Cube
-
IAC0500KC 500kW AC/STS Cube
-
System Configuration
-
Power Module Configuration
-
AC grid access
AC voltage 260Vac-437Vac, 45-65Hz/3-phases+N+PE AC max power 500kVA (8 * 62.5kVA) -
Energy storage battery access
Battery group access channel Max 4 channels Battery dis/charging current ratio 0.5C charge and discharge, 0.75C discharge 30 min Battery dis/charging power to/from AC grid Max 4 * (2 * 62.5kW) = 500kW -
Backup AC support (option)
STS configuration 20ms STS power switch time 20ms STS efficiency 99.50% Function On/off grid control (automatic and manual), seperate 3 phase and N line power switch Protection Protection against countercurrent Backup power Max 500kW Bypass function /off grid function Yes (option) -
PV access (option)
Access channel Max 4 channels Access power Max 4 * 30kWp=120kWp, MPPT support Electric isolation No isolation between the grid and battery, isolation between the PV and battery -
Electric isolation
No isolation between the grid and battery, isolation between the PV and battery -
Metering
AC grid main side 1 bi-directional AC energy meter Backup load side 1 bi-directional AC energy meter Station transformer entry side (option) 1 bi-directional AC energy meter -
EMS
Local EMS IMMU2 EMS controller, inner EMS algorithm and big data Remote EMS platform Based on the Ethernet/TCP IP, Websocket+Json, MQTT+Json, Modbus, IEC104,IEC61850 Remote HW interface 4G/WiFi/WLAN and LAN -
Insulation detection
Each battery channel and each PV channel, +/PE and -/PE detector -
HMI
7" TFT touch screen, 5 status LED, E-STOP, battery fire alarm light/beeper Default English, multi language support -
Dimensions
W * H * Dmm = 1000 * 2200 * 1150mm, Weight: 800kg (full power modules) -
Protection level
IP54 -
EMC/EMI
CE IEC61000-6-2/4 -
Safety certifcation
IEC62477-1, IEC62109-1/2, IEC62619, IEC63056 -
Grid connection
EN50549-1/10,EN50549-2/10,VDE-AR-N 4105, IEEE1547, GBT34120, UNE217001 -
Parallel ability
Max 4 sets work in parallel to get 2MW power and 3.44MWh capacity
-
See Battery Cube Datasheet
-
IAC0500KC
500kW AC/STS Cube See AC Side Cube Datasheet -
IAC1000KC
1MW AC/STS Cube See AC Side Cube Datasheet
-
ICS500K1KR
1 power cube/500kW 4 battery cube/860kWh -
ICS375K1KR
1 power cube/375kW 3 battery cube/645kWh -
ICS250K1KR
1 power cube/250kW 2 battery cube/430kWh -
ICS125K1KR
1 power cube/125kW 1 battery cube/215kWh
-
CEG1K0100G
30kW MPPT DCDC Isolation type -
BEG1K0110G
62.5kW power inverter Non-isolation type