Product Introduction
EXP180K4-LD DC charger adopts all-in-one design and is fully compatible with CCS1/CCS2/NACS/CHAdeMO/GBT EV charging standards. It features a fully liquid-cooled design with low noise, high protection, high reliability and high integration. Equipped with reliable liquid-cooled power modules, it achieves IP65 protection rating, making it suitable for harsh outdoor environments. It can deliver up to 180kW charging power and up to 500A charging current across a wide voltage range from 150Vdc to 1000Vdc.
-
IP65 protection, reliable & robust, salt fog resistant, dust prevention, waterproof
-
CCS1/CCS2/NACS/CHAdeMO/GBT support, optional one 500A liquid cooling connector
-
Intelligent power switching matrix dynamically allocates power modules among connectors
-
Optional cable retractor, credit card (POS), VIN code support
-
TUV CE, RED, CB and OCA certification
-
WEB/APP Maintenance Backend System enhances the operation and maintenance effectiveness
-
Optional cable retractor, credit card payment (POS), VIN code support
-
Ring network power sharing between two chargers
-
60dB ultra low noise
Application
-
CoolRingTM work with two 180kW chargers
Each charging connector can get full 360kW power when CoolRing works
Technical Specification
-
Technical Specification
-
AC Input
Frequency 45Hz~65Hz Voltage CE: 3-phase+N+PE, 380/400V±10%; UL: 3-phase+(N)+PE , 480V±10% Max input current CE: 291A; UL: 228A Power factor >0.99 THDi <3% (rated input) -
DC Output
Voltage 150Vdc~1000Vdc Constant power voltage range 300Vdc~1000Vdc Max output current 600A@300V/360A@500V/180A@1000V Max output power 180kW -
Operating Environment
Operating temperature -30°C~+65°C, full power output up to 50°C, power derating 5%/°C above 50°C Transportation/Storage temperature -40~+75°C Relative humidity ≤95%RH, non-condensing Altitude 2000m Atmospheric pressure 80kPa~110kPa Cooling method Liquid cooling Protection rating NEMA 3R/IP65/IK10 (IK08 for touch screen) -
Standard
Backend OCPP 1.6J, support firmware update to 2.0x, OTA support, P&C/smart charge/power management support CCS PLC communication DIN70121 and ISO15118 CHAdeMO CHAdeMO V1.2 GBT GB/T 18487.1-2015, GB/T 27930-2015, GB/T 20234.1~3-2015 Certification TUV CE, RED, CB, OCA
EN 61851-21-2 Class A, EN 61851-1/EN 61851-23/EN 61851-24 -
Function and Interface
HMI Tempered glass protective 7" TFT touch screen LCD, three RGB LED, EPO Metering DC energy meter, GB/T 29318 and JJG1149 standard, optional MID meter Monitor interface LAN and LTE wireless modem support Optional CoolRingTM power transfer Enables power transfer between two chargers, each charging connector can get the total charging power Power switch mode Intelligent power switching matrix dynamically allocates power modules among charging connectors, maximizing overall power utilization efficiency Payment RFID, Mobile APP, POS (optional) MBE function support WEB/APP Maintenance Backend System enhances the operation and maintenance effectiveness -
Mechanical Parameters
Dimensions (W * H * D mm) 700 × 1995 × 850 mm Weight (kg) 490 kg -
Charging Protection
Overcurrent protection, short circuit protection, overvoltage protection, undervoltage protection Insulation monitoring, protect earth connect monitoring Reverse polarity protection, overtemperature protection RCD-A main protection -
Configuration
Charger module configuration LRG1K0100G 30kW1000V liquid cooled charger power module, total 6 power module sockets Charging connector configuration 2 * CCS2/GBT or CCS2+GBT/CHAdeMO Charging connector capacity GBT: 250A/400A/500A CCS2: 250A/375A/500A CHAdeMO: 125A/200A