EXP600K4
600kW Liquid Cooled Power Cube/10 Charging Connectors, Overhead Charging Dispenser Solution
Product Introduction
EXP600K4-LWR5 split type high power charger is specially designed for the EV charger operator with split and multi charging point application. It supports CCS2/CHAdeMO/GBT compatible charging connectors, 600kW high power output and max 10 charging connectors to support 5 dual-connector dispensers or 10 single-connector dispensers. Optional 500A liquid cooled charging connector and each charging connector can get max power through the intelligent power switching between power module groups to maximize the power efficiency. Fully liquid cooled power module application achieves extreme high protection and high reliability. The overhead charging dispenser for the bus station solution is also available with the same power cube.
-
Building-block modular design, simplified & standardized interface -
IP65 protection, reliable & robust, salt fog resistant, dust prevention, waterproof -
CE, RED, CB and OCA certification, Optional NMI Eichrecht certification configuration -
Patented U-Type air duct design -
Power cube 60dB, stand floor dispenser 55dB, overhead dispenser 0dB -
Customizable dispenser, overhead dispenser for bus station solution -
Max 10 charging channels configuration, 300A or 500A configuration -
WEB/APP Maintenance Backend System enhances the operation and maintenance effectiveness -
Fully liquid cooled
Technical Specification
-
EXP600K4
-
AC input
AC input frequency/voltage 45-65Hz/ 3-phase+(N)+PE / 260Vac-530Vac AC max input current 2*480A@380Vac Power factor >0.99 Total harmonic current <5% (rated input ) -
DC output
Output DC voltage range 150V-1000V Max DC output power 600kW@300V~1000V DC output current Max 500A for each output charging channel, opt Max 300A for each output charging channel Max system efficiency >96% (rated input and output) Output channel Max 10 charging channels as the input of the charging dispensers Dispenser support Max 5 dual-connectors dispensers or 10 single-connector dispensers -
HMI
RGB LED, E-STOP -
Mechanical
Dimensions: W * H * D mm = 2050 * 2200 * 850 mm Weight: 1200kg + 20 * 30kg = 1800 kg (full power modules and full liquid) -
Protection class
IP65 (excluding heat exchange chamber) -
Noise
<55dB (@25°C, rated input and output ), max noise <60dB -
Power switch
Intelligent power switch among the power module groups, can switch to each output channel to maximize the power efficiency -
Power module
Max 20 module slots LRG1K0100G 30kW/1000V liquid cooled power module -
Charging Dispenser-Stand Floor Dispenser (EXP200/250 FDC)
DC input DC input voltage range:150V~1000V
DC input channel:2 channel DC busDC output Output charging cable:2
Output DC voltage range:150V~1000V
Max DC output current:2 * 200A (opt 250A)HMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 0 -
Charging Dispenser-Stand Floor Dispenser (EXP300-FDC)
DC input DC input voltage range:150V~1000V
DC input channel:2 channel DC busDC output Output charging cable:2
Output DC voltage range:150V~1000V
Max DC output current:2*300AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A), CHA:125A (opt 200A) Noise 0 -
Charging Dispenser-Stand Floor Dispenser (EXP400-FDC)
DC input DC input voltage range:150V~1000V
DC input channel:2 channel DC busDC output Output charging cable:2
Output DC voltage range:150V~1000V
Max DC output current:2*375AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 0 -
Charging Dispenser-Stand Floor Dispenser (EXP500-LDC/LLDC)
DC input DC input voltage range:150V~1000V
DC input channel:2 channel DC busDC output Output charging cable:2
Output DC voltage range:150V~1000V
Max DC output current:500A + opt200A/300A/375A/500AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/195kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A), CHA:125A (opt 200A) Noise 55dB -
Charging Dispenser-Overhead Dispenser (EXP250/300-FSW)
DC input DC input voltage range:150V~1000V
DC input channel:1 channel DC busDC output Output charging cable:1
Output DC voltage range:150V~1000V
Max DC output current:200A (opt 250A/300A)HMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:763*415*240/50kg/IP65 Charging connector configuration CCS or GBT or NACS Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A), CHA:125A (opt 200A) Noise 0 -
Standard
Charging standard GBT 27930-2011 and 27930-2015, CHAdeMO V1.2/V2.0, DIN70121 and ISO15118, OCA EMC/safety CE/RED/CB; EN 61851-21-2/EN 61000-6-4/EN 61000-6-2 Class A; EN 61851-1/EN 61851-23/EN 61851-24 -
Working Environment
Ambient temperature Working temperature range -30~+70°C, full load temperature range -25~+50°C, power derating 5%/°C above 50°C Storage temperature -40~+75°C Working humidity 0 ~ 95% Working altitude 2000 m
