
Product Introduction
The energy storage charging system employs LFP battery for energy storage and through the local and cloud EMS, it helps balance the power supply and demand between the grid, battery, EV charging and renewable energy access. It carries signifcant values in grid peak load shaving, grid capacity expansion and renewable energy resource access.
-
Total electric insolation among the grid, battery, EV and new energy input
-
Highly compatible with different system confgurations
-
Flexible change of the system confguration, capacity and the direction of power fow
-
WEB/APP Maintenance Backend System enhances the operation and maintenance efectiveness
-
Diversifed battery group confguration and access
-
Unifed EMS strategy
Application
-
Solution Values
-
Energy Management Strategy
Technical Specification
-
IHS540K2 540kW Power Cube
-
Charging Dispenser
-
IBS200K1KC 200kWH Battery Cube
-
AC grid access
AC input voltage 45-65Hz/3-phase+(N)+PE/260Vac-530Vac AC max input power Max 360kW AC distribution AC grid charging power to energy storage battery is max 120kW, to EV is max 360kW -
Energy storage battery access
Battery group access 1 group Battery capacity/group 200kWh/280Ah/627V~806V/0.5C dis/charge/max 0.75C discharge 30 min Battery charging power from AC grid Max 4 * 30kW =120kW (4 *30kW ACDC power module configuration) Battery discharging channel to EV Max 6 channels Battery B2V EV charging power Max 6 * 30kW =180kW (6 *30kW DCDC power module configuration) -
Electric vehicle charging
EV charging point Max 6 charging connectors, 3 dispensers with dual charging connectors EV charging power Max 360 kW (180kW from AC grid, 180kW from ES battery) EV charging power transfer Power switch among the power module groups to maximize the power efficiency EV charging voltage 150V~1000V -
PV access
Access channel 2 channels Access power Max 2 *30kW MPPT -
Metering
AC grid side 1 AC energy meter -
HMI
7 " TFT touch screen, 5 LED, E-STOP -
Dimensions
W * H * D mm = 1000 * 2200 * 1150 mm Weight: 550 + 18*22.5kg = 955kg (full power modules) -
DC power supply
Optional function, support 150V~1000V DC load (max 60kW) -
Power module configuration (18 max)
MPPT DCDC: 0~2
Battery discharge DCDC: 2~6
Battery charge ACDC: 1~4
AC2EV charge ACDC: 1~8
-
EXP200/250 FDC
DC input DC input voltage range: 150V~1000V
DC input channel: 2 channel DC busDC output Output charging cable: 2
Output DC voltagerange: 150V~1000V
Max DC output current: 2 * 200A (opt 250A)HMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 0 -
EXP300-FDC
DC input DC input voltage range: 150V~1000V
DC input channel: 2 channel DC busDC output Output charging cable: 2
Output DC voltagerange: 150V~1000V
Max DC output current: 2*300AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 0 -
EXP400-FDC
DC input DC input voltage range: 150V~1000V
DC input channel: 2 channel DC busDC output Output charging cable: 2
Output DC voltagerange: 150V~1000V
Max DC output current: 2*375AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm:500*1800*260/185kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 0 -
EXP500-LDC/LLDC
DC input DC input voltage range: 150V~1000V
DC input channel: 2 channel DC busDC output Output charging cable: 2
Output DC voltagerange: 150V~1000V
Max DC output current: 500A+200AHMI Tempered glass protective 7" capacitive touch screen LCD for stand floor dispenser, RGB panel LED, E-STOP, RFID, POS (opt) Metering DC energy meter, opt NMI Eichrecht certification configuration Monitor OCPP 1.6J, support update to 2.0, P&C, smart charge and power management support, LAN 100M and LTE wireless modem support Cable management Top assembly two cable retractors and light bar for stand floor dispenser. Select one or two cable retractors based on cable length for overhead dispenser MBE function support WEB side Maintenance Backend System enhances the operation and maintenance effectiveness Charging protection Overcurrent/short circuit/overvoltage/undervoltage/RCD/insulation/overtemperature protection
Reverse polarity protectionMechanical Dimensions: W*H*D mm: 500*1800*260/195kg/IP55/IK10 Charging connector configuration 2*GBT/CCS/NACS or CCS+NACS/GBT/CHAdeMO or 1*GBT/CCS/NACS/CHAdeMO Charging connector capacity GBT:250A (opt 400/600A) , CCS:200A (opt 250/300/375/500A), NACS:200A (opt 300A/380A) , CHA:125A (opt 200A) Noise 60dB
-
Energy storage battery
200kWh/280Ah energy storage battery, battery voltage: 627V~806V, charging/ discharging ratio: 0.5 C dis/charge, max 0.75 C discharge 30 min -
High voltage control box
Infypower high voltage control box -
Battery BMS
Infypower 2 level BMS structure: battery pack BSU + high voltage control box BMU -
Thermal management
Industrial outdoor cool/heat air conditioner, intelligent partitioned thermal management -
Fire suppression system
Temperature-activated fire extinguishing system + fire proble tube + air pressure sensor and valves, emergency fan -
Safety sensor
Door access seneor + smoke detector + harmful gas detector -
Envirement sensor
Water sensor + temperature sensor + humidity sensor -
Protection class
IP55 -
Dimensions
W * H * D mm = 1200 * 2200 * 1200 mm -
Weight
1600 kg (with battery)