
Product Introduction
LRG1K0100G is specially designed for EV Fast DC chargers with liquid cooled requirement. It has the features of high efficiency, zero noise, high power density and high reliability. By 3 phase 4 wire AC input, it can deliver up to 30kW DC output power and cover 150 to 1000VDC output voltage range. It has obtained EMC/EMI Class B, TUV CE and cTUVus certification.
-
Constant power output@300V-1000Vdc, full power output@320V-530Vac
-
G65 universal coolant, normal operation at liquid temperature -40℃ , no power derating at 65℃
-
Peak efficiency ≥96.5%, full load max efficiency ≥96.2%
-
Anti-condensation water design, full hot plug support for liquid and electrical interfaces, quick-plug connectors for liquid circuits
-
Conformal coating and glue flling provide high protection for high reliability
-
Scalable to 60kW with same size
Product Values
-
Power Module Output Voltage and Current Curve
-
Power Module Output Power and Input Voltage Curve
-
Power Module Output Power and Coolant Temperature Curve
Technical Specification
-
LRG1K0100G
-
Environmental
Ambient temperature -40°C~+75°C Storage temperature -40°C~+70°C Humidity ≤95%RH Altitude 4000m -
Cooling Requirement
Coolant liquid Automobile antifreeze G65 liquid is prefered Coolant temperature range -20°C~+60°C with full load, power derating above 60°C Coolant flow requirement 6L~10L/min, min 0.22 bar pressure difference between the input and output liquid interface Coolant pressure/volume Max 120PSI 8 bar, 0.25L in the module -
Input Side
Frequency range 45~65Hz Input voltage range 3L+PE, 260Vac~530Vac Power factor 0.99 Max input current 58A ITHD (total harmonic distortion) ≤5% Peak efficiency ≥96.5% Full load efficiency ≥96.2% -
Output Side
Output power 30kW@ voltage ≥ 300Vdc Voltage range 150Vdc~1000Vdc Current range 0~100A Current sharing <±5A Voltage stabilization accuracy <±0.5% Current stabilization accuracy ≤±5% (output power in 50%~100%) -
Control
Communication CAN bus, max 48 power modules in parallel Indication light Green LED: normal operation; yellow LED: alarm; red LED: failure Address indication Automatic address identification, panel dial switch for group setting ESTOP Quickly stop output less than 60V in 300ms, outerside 12V DO control -
Alarm and Protection
Input/output voltage protection Over/under volt protection with automatic shutdown/restart when the volt returns to normal Over current/short circuit protection Automatic shutdown and lock, power off to start and unlock Over temperature protection Automatic shutdown, automatic restart when the temperature returns to normal -
EMC/EMI
TUV CE certification EN61851-21-2, Class B -
Safety
cTUVus/TUV CE certification UL2202, EN61851-1, EN61851-23 -
Reliability
MTBF >300,000 h -
Mechanical
Dimensions 123mm (H) × 300mm (W) × 453mm (D) (excluding the holder and interface plug) Weight ≤30 kg Protection class IP30 with condensation water protection design -
Ordering Information
Type LRG1K0100G liquid cooled 30kW1000V ACDC power module