REG1K0135P2

40kW 1000V Variable Power Factor ACDC Power Module

Product Introduction

REG1K0135P2 is a VPF DC charging module specifically designed for EV charging applications with PF adjustment or reactive power compensation requirements. It uses a 3-phase AC input without a neutral line and features wide PF regulation range, wide reactive power compensation range, high efficiency, high power density and low harmonics.

Super compatible: compatible in size and interface with the standard ACDC charging module, DCDC, BiDi ACDC, BiDi DCDC and MCS power module
High harmonic performance: iTHD meets charging standard requirements during PF adjustment or reactive power compensation
40kW, the highest power density in the industry, UHPD 10% higher than average
Conformal coating and glue flling provide high protection for high reliability
No load PF > 0.9, full-load PF 0.999
BABA support
ESTOP function, 1 ms shutdown
Full SiC
Full power 40kW output, PF adjustable range leading/lagging 0.8, max reactive power compensation 40kVar
Peak efficiency > 97.5%, full load efficiency > 96.5%

Product Values

Power Module Output Voltage and Current Curve
Power Module Output Power and Input Voltage Curve
Power Module Output Power and Ambient Temperature Curve
Power Module DC Output Power and Power Factor Curve

Technical Specification

REG1K0135P2

Environmental

AC input

Frequency range	45~65Hz
Input voltage range	3L+PE, 260Vac~530Vac
Power factor	>0.9@no load, ≥0.99 @50%~100% full load output power, rated input voltage and frequency
Max input current	78A
ITHD (total harmonic distortion)	≤5% @output power > 15kW or reactive power > 15kVar
PF adjustment range	0.8C~0.8L
Reactive power compensation range	40kVar

Peak efficiency
Full load efficiency

DC output

Output power	40kW @voltage >300Vdc
Voltage range	150Vdc~1000Vdc
Current range	0~133.3A
Current sharing	<±5% (10%~100% load)
Voltage stabilization accuracy	<±0.5%
Current stabilization accuracy	≤±1% (output power in 20%~100%)

Control

Communication	CAN bus, max 32 power modules in parallel
Indication light	Green LED: normal operation; yellow LED: alarm; red LED: failure
Address indication	Automatic address identification, panel dial switch for group setting
Noise setting	Standard mode with max 78dB, de-noise mode with max 65dB, silent mode with max 55dB
ESTOP	Quickly stop output less than 60V in 300ms, outerside 12V DO control

Alarm and protection

Input overvoltage/undervoltage protection	Automatic shutdown, automatic restart when the volt returns to normal
Output overvoltage protection	Automatic shutdown, manual restart when the volt returns to normal
Over current/short circuit protection	Automatic shutdown and lock, power off to start and unlock
Over temperature protection	Automatic shutdown; enters standby state and waits for a power-on command to start working when the temperature returns to normal

EMC/EMI
Safety
Reliability
Mechanical
Ordering information
Certification

Download

Ambient temperature	-40°C~+75°C, power derating from 55°C
Storage temperature	-40°C~+70°C
Humidity	≤95%RH, non-condensing
Cooling	Forced air cooling
Altitude	≤2000m

Dimensions	84mm (H) × 300mm (W) × 395mm (D)
Weight	≤17kg