LBG1K0120G
35kW 1000V Liquid Cooled Bidirectional ACDC Power Module
Product Introduction
LBG1K0120G is the bidirectional ACDC power module used to connect the battery or DC bus to the AC grid. It specifically aims for bidirectional applications in V2G/VPF function EV chargers, retired battery utilization and the micro grid. It can also replace traditional PCS for energy storage systems. With the high frequency MOSFET/SiC switch technology, it can achieve excellent performance, high power density, high expansion ability and high reliability. By employing liquid-cooled design, it features high protection and zero noise.
-
Fully isolated bidirectional ACDC, off-grid support, supports max 32 modules on-grid in parallel and 15 modules off-grid in parallel -
G65 universal coolant, normal operation at liquid temperature -40°C , no power derating at 60°C -
Supports 380V/400V/480V grid, TUV CE/ cTUVus, global grid code certification -
Rapid current direction change within 10ms, automatic constant bus voltage support -
Anti-condensation water design, full hot plug support for liquid and electrical interfaces, quick plug connectors for liquid circuits -
Conformal coating and glue filling provide high protection for high reliability -
Constant power output@300V-1000Vdc, full power output@320V-530Vac -
Peak efficiency ≥ 97%, full load efficiency ≥ 96%
Application
-
V2G application
-
BES application
-
E-LOAD application
Product Values
-
Power Module Output Voltage and Output Current Curve
-
Power Module Output Current and Coolant Temperature Curve
-
Power Module Output Power and AC Voltage Curve
-
Power Module AC Output Power and DC Input Voltage Curve
Technical Specification
-
LBG1K0120G
-
Environmental
Ambient temperature/storage temperature -40°C~+75°C/-40°C~+75°C Humidity/altitude ≤95%RH/2000m -
AC to DC mode-AC input
Input voltage & current range 400/480Vac, 3L+PE; max 68A@320Vac Input voltage/frequency range 260Vac~530Vac, 45Hz~65Hz Power factor ≥0.99 ≥ Half-load output power @ rated AC input THD ≤5% ≥ Half-load output power @ rated AC input -
AC to DC mode-DC output
Rated power 35kW Voltage and current range 150Vdc~1000Vdc, 0~117A Peak efficiency ≥97% Full load efficiency ≥96% -
AC2DC and DC2AC mode conversion time (with battery test)
10ms -
DC to AC mode-DC input
DC input voltage range On grid: 150 to 1000Vdc, off grid: 200 to 1000Vdc Max input current 133A -
DC to AC mode-AC output
Rated power 35kVA/35kW, 3L+(N)+PE, 50Hz/60Hz Output current harmonic content <5% Unbalance of three-phase current 2% @steady state, 4%@transient state Output power factor User setting scale, 0.8~1, -0.8~-1 Low voltage ride through support, anti-islanding support Peak efficiency ≥97% Full load efficiency ≥96% Off grid-Voltage setting 380Vac/400Vac/480Vac (must without N wire at 480Vac) Off grid-Power 35kVA/31.5kW Off grid-Output voltage harmonic content <2% @ full R load/<5% @ full RCD load Off grid-Dynamic voltage stability 5% @ 20%~100%~20% R load -
Control
Communication CAN bus Indication light Green LED: ON for AC2DC mode, breathing for DC2AC mode; yellow LED: alarm; red LED: failure -
Power module in parallel
Max number: on grid: 32, off grid: 15 -
Cooling requirement
Coolant type G65 antifreeze (60% Ethylene Glycol + 40% pure H2O) Coolant temperature range -20°C~+60°C with full load, power derating above 60°C Coolant flow requirement 6L~10L/min, min 0.22 bar pressure difference between the input and output liquid interface Coolant pressure/volume Max 120PSI 8 bar, 0.25L in the module -
Protection
IP30 with condensation water protection design -
EMC
TUV CE certification EN61000-6-1/-2/-3/-4 Class B -
Safety
cTUVus/TUV CE certification UL2202, CSA C22.2 No. 107.1, UL9741, UL1741, IEC62909, EN62477 -
Grid connection
Multi-country grid conformity VDE-AR-N 4105, EN50549-1: 2019, EN50549-10: 2022, UL 1741SB: 2021, IEEE 1547: 2018, IEEE 1547.1: 2020 -
Mechanical
Dimensions/weight: 123mm (H) × 300mm (W) × 453mm (D) (excluding the holder and interface plug), ≤ 32kg
